What's My Zoning?

A cut-out picture from the Zoning By-Law

Contacts

Please read and follow the 3 steps below in order to identify your zoning.

  1. ​​Locate the property on the Navigate Newmarket interactive map
  2. Identify your zoning
  3. Consult the Zoning By-law
​Documents
​Helpful Links

Step 1 - Locate the p​roperty on the Navigate Newmarket interactive map.

Graphic button linking to the Navigate Newmarket map.







  • Open the Navigate Newmarket interactive map​(Keep this page to read the steps below. Safari is not supported, for best performance, use Chrome). 
  • Select the 'Development Information' map.
  • Select the three (3) horizontal lines at the top left of the page.
  • Select Search.

The Navigate Newmarket map, highlighting to input an address in the search field.








  • Insert the address.
  • Select the binoculars to locate the property.
  • Select Search to zoom to the property.
  • To begin again, select Reset.

Step 2 - Identify your zoning.

The Navigate Newmarket map showing many types of zoning.








  • Note the zoning for your property (RED text). 
    • Example: R1-D (Single Detached Residential), or EH (Heavy Employment), or CA (Automotive Commercial). 
    • These identify land uses found in the Zoning By-law.
    • If the property appears in bright blue along the Yonge Street and Davis Drive corridor, it is within the Urban Centres Zoning By-law (2019-06). Additional details can be found by clicking here.

Step 3 - Consult the Zoning By-law.

The cover page of the Town's zoning by-law.














An image of section 6.2 of the Zoning by-law.











  • Consult Section 6 of the by-law. 
  • Depending on your zoning (e.g. R1, MU, CS, EM, etc) consult the relevant Zone Category to determine what uses are permitted on the property.
  • ​For example, if you are considering leasing a building in an employment area (EM, EG, and EH zoning) such as is common east of Leslie Street, you would consult the ​Employment Zones table in section 6.5 and verify if your planned use is permitted.
  • If the property has an exception number such as R1-D-119 rather than simply R1-D, consult the exceptions in Section 8 to find your unique requirements.
  • If you are uncertain of your use, check the definitions at the start of the zoning by-law. For example, ​the definitions will explain the difference between a manufacturing use and a warehouse use and help you determine which zones permit each one. 

An image of section 6.2.2 of the Zoning by-law.








  • Also consult the Zone Standards to determine the requirements for the property related to elements like distance setbacks from the property line, maximum building height, and maximum driveway width. These are indicated by the suffix to your zoning code (e.g. R1-D).
  • If the property has an number following your zoning (such as R1-D-119​ or CO-1-4) rather than simply R1-D, consult the exceptions in Section 8 to find how your zoning deviates from the standard requirements for your parent (R1-D, for example) zone. 

 Related p​ages:​​​

Step 4 - Contact the Planning Services department with any questions.​

​The Zoning By-law is a complex document that must be interpreted in its entirety. In addition to your zoning, there are other requirements that must be met for many changes. These include required permits, provisions that are applicable to all zones, parking requirements, approvals from other agencies, and other matters. Before undertaking any works, and if you have questions regarding your zoning, contact the Planning Services department​.